Specification

Floor Coverings   Bespoke sizes / shapes readily available   Load Resistance   70kg / cm (1000 lbs/in²)   ESD Features      Co-Efficient of Friction   3.5 μ   Heat Resistance   working range 0ºc - 50ºс (32ºf - 122ºf)   Colour   Cobalt | Titanium | Midnight | Slate   Anti Microbial   All Dycem products incorporate Biomaster   Toxicity   Non-Toxic   Outgassing   Click here for full details   Chemical Resistance   Click here for full details   Warranty   3 years   Expected Life   3-5 years Cleanzone Standard Colours Plain colour options highlight Contamination that is being collected on the surface. Titanium and Cobalt options still control over 99% of contamination but this contamination is masked by the attractive design. Click Images to Enlarge   Cobalt Midnight   Titanium Slate

Where to use

Use Dycem wherever contamination is a concern: entrances and exits to critical areas, changing rooms, transfer hatches, corridors and airlocks.

Dycem's comprehensive range of High Performance Contamination Control Zones reduce particulate counts in all your critical areas.

	All critical areas to prevent ingress of contamination
	All exits to prevent contamination leaving the critical area.
	In corridors to prevent cross contamination.
	Inside the critical area adjacent to critical products and processes.
	Airlocks
	Gowning rooms
	Product transfer rooms
	Warehouses

Cleaning

Cleaning is simple, in many cases your own facility approved equipment detergents, disinfectant & microbial agents can be used.  Alternatively, Dycem has a range of cleaning products designed to compliment its range of Contamination Control Zones

Click here for more details.

MSDS

Chemical Resistance

Spillages of any chemicals will not harm the Dycem material if removed immediately.

Purity Study

The data in the following pdf is a summary of tests undertaken on Dycem products over the last nine years as part of the company’s continued programme of research and development. The test data, designed to substantiate the properties of Dycem products for use in critical environments, is divided into two distinct areas of investigation:

1. Outgassing Behaviour – Organic Components: A series of tests directed to establish whether organic components used in the manufacture of Dycem products are released into the atmosphere under conditions and in environments where the product will be used.
2. Composition and Physical Transfer – Inorganic Components: A series of tests directed to establish the presence of inorganic components, existing mainly as metal ions, in Dycem products and electronic components such as wafers or disks.

Measuring Areas